Cutting machine type ZSM 150

Technical description:

The machine of the type ZSM 150 was engineered for cutting long length timing belts.
Single cuts are performed, so the coil is cut along its running direction.
All common timing belt profiles can be processed.

Processing dimensions:

	Max. cutting width 150 mm
	Max. coil diameter 1,000 mm

Machine frame:

	Stable, welded construction
	Delivered as one unit
	Affixing of the frame to the floor possible
	All linear ducts made of hardened, grinded steel shafts and ball bearings

Tool sleigh:

	Die movement via manually driven trapezoid spindle
	Digital display of die position
	Cutting tool is a fixed round die
	Die position and cutting depth can be locked

Cutting shaft:

	Stepless variable rpm-control via frequency converter
	Rotation direction changable
	Plastic sheath as wearout-cover for the cutting shaft
	Foot switch for processing

Roll-up frame:

	Clamping of the sleeve for rolling up
	Manual lever for rolling up (automatic rolling up available as special equipment)

Accessories:

	Tool for changing the dies
	Key for the wiring cabinet
	Wiring diagram
	Manual

Safety equipment:

	Emergency power off
	Safety die cover
	Overload protection for drive motors

Special equipment:

	Automatic rolling up of the processed material
	Standby die (thickness: 1.6 or 2.2mm, Ø 100 mm)
	Length measurement of the processed material

Size of the machine:

	Length: ca. 2,500 mm
	Width: ca. 1,200 mm
	Height: ca. 2,200 mm

Power supply: 400 V, 3 Phases, 50 Hz, 10 Ampere

complete view ZSM 150