Deu. Homepage English Home

Belt cutting machine type WSM 100 / WSM 100-B

 

Technical description:

The machine of the type WSM 101 / WSM 100-B was engineered for cutting timing and flat belt pulleys. It is especially suitable for processing frequently
changing sleeves and profile types with low to medium quantities.
The WSM 100-B has the same functionality but is using low-cost machine
parts. All common timing belt profile types can be processed.

 

Processing dimensions:

bullet Max. belt length 5.800 mm
bullet Min. belt length 130 mm (with device for cutting small belts)
bullet Max. belt width 750 mm

 

Machine frame:

bullet Stable, welded construction
bullet Delivered as one unit
bullet Affixing of the frame to the floor possible
bullet All linear ducts of the WSM 100 made of hardened, grinded steel shafts and bearing balls

 

Tension slide:

bullet Tension of the sleeves is variable in 4 levels from 3 kp to 140 kp
bullet Moving of tension slide b drive motor
bullet Angle of tension shaft (Ø 100 mm) variable

 

Tool slide:

bullet Cutting die movement via manually driven trapezoid screw spindle
bullet Digital display of die position of cutting die
bullet Cutting tool is a fixed round die
bullet Tool holder exchangeable
bullet Execution of the cutting motion via hand lever

 

Cutting shaft:

bullet Stepless variable rpm-control via frequency converter from 70 to 450 rpm
bullet Rotation direction changable
bullet Plastic sheath as wearout-cover, Ø 70 mm
bullet Manual triggered holder for supporting the cutting shaft

 

Accessories:

bullet Wiring diagram
bullet Manual
bullet Tool for exchanging the cutting shaft
bullet Tool for exchanging the cutting die
bullet Key for the wiring cabinet

 

Safety devices:

bullet Emergency power off
bullet Safety knife cover
bullet Release of the tightening of the belts only with closed holder

 

Special equipment:

bullet Semi-automatic control for the cutting shaft angle
bullet Push-on shaft in addition to cutting shaft
bullet Special die for cutting poly-v-rip belts
bullet Cutting shaft in special diameters (40 mm, 50 mm, etc.)
bullet Pneumatically driven retainer for the cutting shaft
bullet Standby knife (1.6 or 2.2mm thick, Ø 100 mm)
bullet Tool holder for additional die Ø 100 mm

 

Size of the machine:

bullet Length: ca. 3,500 mm
bullet Width: ca. 1,450 mm
bullet Height: ca. 1,150 mm

 

Power supply: 400 V, 3 Phases, 50 Hz, 16 A

 

Complete view on WSM 100 / WSM 100-B

1