Cutting machine type BSM 120

Technical description:

The machine of the type BSM 120 was engineered for cutting timing and
flat belts. The machine is especially suited for cutting small numbers of
pieces. Sleeves and long length belts can be cut.

Processing dimensions:

	Max. cutting width 120 mm
	Min. belt length 250 mm

Machine frame:

	Stable, welded construction
	Delivered as one unit
	Insertion of long length belts on the frame
	Guide table with edgewise clamped for cutting material

Cutting shaft:

	Stepless variable rpm-control via frequency converter (2 to 10 m/s)
	Rotation direction changable
	Distance sleeves between the round dies
	Plastic sheath on the counter-pressure shaft
	Manually fixation of cutting depth
	Fast switch for processing

Accessories:

	Tool for exchanging the cutting die
	5 dies
	1 set distance sleeves
	Wiring diagram
	Manual

Safety devices:

	Emergency power off
	Safety die cover
	Tool rest on the frame
	Overload protection for the drive motor

Special equipment:

	Standby knife (thickness: 2.0 mm, Ø 60 mm)
	Additional distance sleeves

Size of the machine:

	Length: ca. 800 mm
	Width: ca. 600 mm
	Height: ca. 1,100 mm

Power supply: 230 V, 50 Hz, 10 Ampere

complete view on BSM 120